Posted

print

favorite this post INDUSTRIAL JOBS AVAILABLE NOW HIRING APPLY TODAY!! CALL 918-742-5300 (TULSA) hide this posting unhide

compensation: PAY LISTED ABOVE
employment type: full-time

LRP
3117 S. JAMESTOWN
TULSA, OK 74135
918-742-5300

APPLY TODAY FOR THE FOLLOWING POSITIONS:


MACHINING:

CNC SHOP WORKING LEADMAN: $20-$25 hr. will be a working leadman running machines, and running crew, problem solver, troubleshoot, give directions to employees.

CNC LATHE OPERATORS: 2nd shift, Setups and edits. 3:30pm-Midnight shift.

CNC MILL & LATHE MACHINISTS: 3 years of experience required. Must have ability to program machines along with running machines with Fanuc controls and g-codes, must have own tools. $18-$20

CNC QUICKMILLS INTIMIDATOR: Must have fanuc controls exp. or have ran a Mori-Seiki, Haas, Okuma or Mazak experience you will qualify. 2nd shift DOE

CNC PROGRAMMER: Esprit software and G-codes, Plus must also run machines $20+ DOE

CNC/MANUAL MACHINISTS: 2 years experienced Manual & CNC experience. Have own tools. Exp with manual mills, lathes and CNC equipment is required. Puma Lathes and Haas mills. Basic computer skills. $18+

WELDING:

MIG STRUCTURAL WELDERS: Must be able to set up welding machine., run clean bead T-joint sheetmetal on stainless steel 2" downhill, 2" uphill 6" of weld, visual test. North Tulsa, lots of overtime. $15

CODE FITTER WELDERS: Must have 5 years experience. Ability to pass ASME Code Section 8 welding test, Tig, in 6 g position and Fluxcore, have excellent written and verbal communication skills, ability to use and read lever, tapes, protractors, and various tools, read and interpret blueprints and have strong math skills. Located in Sand Springs. $26-$28

FLUXCORE WELDERS: Glenpool Fabrication shop

STRUCTURAL FITTERS: Glenpool Fabrication shop, lay-out materials, read blueprints, tack welding.

HARD WIRE MIG/SPRAY ARC: Production type environment a plus. Fitter experience a plus. Operate and interpret reading from basic measurement equipment. West Tulsa Hr. 1st shift.

PIPE/STRUCTURAL FITTERS: 3 + years experience. able to layout their own materials, use a cutting torch and read blueprints. $17-$19 Catoosa

PIPE WELDERS: 3 + Solidwire and Fluxcore, Subarc and Tig Welding, all automatic on a pinwheel, 6g test all on pipe. $20+ Company builds vessels, skids, platforms and heaters. Catoosa

STRUCTURAL WELDERS: 3 yrs experience Fluxcore on carbon steel. Will be given a plate test. Uphill, downhill with fluxcore. Code Shop 3g. Fluxcore on plate uphill and downhill. Company builds vessels,skids, platforms and heaters. Catoosa

FITTER WELDER I: Ability to pass Mig and Fluxcore test, ability to read and use level, tape measure, protractors, and various tools, read and interpret blue prints to have strong math skills. $22-$24

FITTER WELDER II: Must have 5 years experience. Ability to pass Tig, Mig, Fluxcore test, ability to read and use levels, tapes, protractors, and various tools, read and interpret blue prints and have strong math skills. $24-$26

STRUCTURAL WELDERS: Fluxcore and Mig processes, fast paced shop fabrication shop.

ASME CODE WELDERS: Able to pass ASME code-compliant welding test including 3g Fluxcore and Pulse Mig. $18-$20

FLUXCORE WELDERS: 2 +years experience. ability to pass a 3g/4g fluxcore, fill in cap X-Ray test, 1/2 inch plate structural welding.

SKILLED:

HEMSAW OPERATOR: 2nd shift Experienced
$14 North Tulsa. Read tape measure.

TEST MOLDER: $16+ HR.
1ST SHIFT: 5:00AM-5:30PM $13+ Hr.
2ND SHIFT 5:00PM-5:00AM $13+ hr. with $1.00 Night Differential.
POSITION SUMMARY:
Test molds to ensure proper operation and to establish production procedures to maximize production, minimize waste and ensure quality parts are produced. Collect materials/parts and walk through test process. Fill out test forms.

ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Checks new, revised and reworked tooling for proper and safe operation.
• Through trial and error, “fine tunes” the production specifications for producing the parts when given weight, press tonnage, etc.
• Writes production procedures.
• Assists production molders with productivity and troubleshooting issues.
• Prepares stock for use in test molding; make preforms, sandblast and paint.
• Completes daily labor tickets.

OTHER DUTIES AND RESPONSIBILITIES:
• Attention to detail and accuracy
• Good critical thinking skills

QUALIFICATION REQUIREMENTS:
• Minimum 1 years molding experience
• High School diploma or equivalent
• Good verbal and written communication skills
• Basic mathematical skills
• Must be able to follow written instructions
• Knowledge of weights and measures conversions
• Familiar with hand tools such as snips, knives, scissors, etc.
• Reading comprehension skills
Lift 50lbs.
Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.
Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.


MANUFACTURING LEAD PERSON: $18+ Hr.
1st shift 5:00am-5:00pm $18+ Hr.
2nd shift 5:00pm-5:00am with $1.00 Night Shift Differential
Prepares and operates molding press to process/produce a high quality product. Ensures production continuity of press lines. Troubleshoots equipment and processes as need arises. Assists operators with documentation and processes. Ensures molding records reflect accuracy of the day’s production. Fills in for Molding Supervisor.

ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Sets up press-checking tonnage, cure time, temperature, speed control etc.
• Retrieves preforms/extrusions/inserts for job as needed.
• Makes sure paperwork is filled out correctly.
• Approves time in Mercury (Kronos).
• Has an understanding of the molding processes at all skill levels.
• Understands how to operate press according to job specifications.
• Insures MIP’s are being followed.
• Inspects parts for flaws.
• Helps troubleshoot molding of rejected parts.
• Records time and work on labor ticket each day.
• Checks production records for job completion and upcoming assignments.
• Communicates with support departments as necessitated by production needs.
• Assigns presses as necessary.
• Assists employees as needed.
• Communicates all production/press related information to next shift lead or shift Supervisor.
• Understands LEAN concepts, such as: TAKT, time, capacity measures, etc.

OTHER DUTIES AND RESPONSIBILITIES:
• Fills in for supervisor when needed
• Assists with mold installation as needed
• Assists with material handling between departments as needed
• Facilitates the training of press operators at all levels
• Moves molding materials from the staging area to the pressline
• Able to relieve and fill-in during lunch breaks and operate press

QUALIFICATION REQUIREMENTS:
• Minimum of one year related experience
• General experience in a production environment filling a supervisory role
• Ability to multi-task
• Problem solving/decision making skills
• Ability to prioritize
• Attention to detail and accuracy
• Conversion of weights and measures
• Comprehension of written and verbal communication skills
• Problem solving skills
• Basic mathematical skills (addition/subtraction, multiplication/division)
Lift 50 lbs.
Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.
Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.


MAINTENANCE II TECHNICIAN $16+
1ST SHIFT: 5:00AM-5:00PM
2ND SHIFT: 5:00PM-5:00AM with $1.00 Night Shift Differential
POSITION SUMMARY:
To maintain or repair equipment and facilities including mechanical, electrical, and hydraulic machinery to keep production running. Perform preventative maintenance. Assist Level III Maintenance when needed.

ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Diagnose basic problems of inoperative equipment or faulty conditions.
• Repair or recommend repair of equipment with faulty properties.
• Read basic blueprints and equipment manuals.
• Do metal fabrication.
• Perform preventative maintenance as required.
• Perform other duties as assigned by supervisor.

OTHER DUTIES AND RESPONSIBILITEIS:
• Problem solving/decision making skills
• Ability to Prioritize
• Ability to work independently or in a team environment
• Attention to detail and accuracy
QUALIFICATION REQUIREMENTS:
• Two (2) years general maintenance experience. Extensive experience preferred.
• Basic verbal and written communication skills required
• Understanding of basic shop mathematics to prepare/analyze figures
• Understanding of basic processes of mechanics, hydraulics, pneumatics, construction, remodel, fabrication and electrical theory
• Provide standard hand tools used in performance of job function
• Be capable of building repair and maintenance including basic electrical service
• Be capable of repair and maintenance of production equipment
• Experience with forklifts, welders, various hand tools, meters, plasma, torch and grinders

PHYSICAL REQUIREMENTS:
• Heavy physical effort such as lifting, bending, carrying, etc. may be required
• Prolonged standing/walking/bending/twisting, crouching, crawling, balancing and squatting
• Pushing/Pulling forces up to/over 40 pounds
• Occasional sitting/keyboard work
• Repetitive motion of finger, wrist, elbow, shoulder or neck movement
• Occasional forceful hand grasp
• Use of fingertips for pinching or retrieving small objects
• Occasional awkward postures of neck, shoulder, wrist, elbow or fingers
• Work in confined spaces or close quarters
• Use of vibrating tools
• Hearing
• Speaking clearly
• Lifting or carrying up to 100 pounds
• Lifting from floor to waist/waist to shoulder/shoulder to overhead
• Reaching above/below shoulder level occasionally while holding objects
• Climbing ladders/scaffolds/step stools/ramps/stairs/unguarded heights
• Seeing to visually inspect, measure/assemble at close distance
• Able to distinguish colors
• Frequent use of motor vehicles, forklifts, power tools, slicing/cutting equipment, machinery and machinery that produces excessive heat.
Lift. 100 lbs.
Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.
Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.


CNC PROGRAMMER 5 YEARS EXPERIENCE $24+ Hr.
1st shift 5:00am-5:00pm
2nd shift 5:00pm-5:00am with $1.00 Night Differential
POSITION SUMMARY:
Programs and sets-up CNC Lathes and Milling Machines. Able to generate code and programs for CNC machines.

ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Able to use solid models or drawings to create code for machines.
• Programs and sets up CNC machines to manufacture parts per drawings or instructions.
• Coordinates 1st article inspections on all parts.
• Performs time studies to find most efficient method of producing products.
• Ensures correct tooling for the job is being utilized.
• Assists Supervisor in overseeing production operations and scheduling.
• Helps advance skills of lower level CNC machinists.
• Assigns work to others and becomes responsible for that work.
• Meets all production quotas.
• Spends time on the floor. Operates machines as needed.

OTHER DUTIES AND RESPONSIBILITIES:
• Interfaces with Engineering as required
• Utilizes Cam programming software
• Visualizes and studies blueprints
• Utilizes critical thinking skills

QUALIFICATION REQUIREMENTS:
• Bachelor’s degree or formal training/certification in programming and operating CNC machines
• Minimum 5 years of experience in programming and operating CNC machines
• Experience with micrometers, calipers and other precision tools
• Intermediate computer skills (Cam software, SolidWorks, AutoCad, MS Word, Excel, PowerPoint)
• Mathematical skills including geometry and trigonometry
• Verbal and written communication skills
• Ability to prioritize and handle multiple tasks
• Ability to follow detailed and complex instructions
• Ability to problem solve/decision making
• Manual machining a plus but not required

PHYSICAL REQUIREMENTS
• Frequent bending, standing, walking, kneeling, reaching and climbing
• Keyboard work
• Hearing and speaking clearly
• Lifting/carrying objects up to 50 lbs.
• Lifting from floor to waist
• Reaching from shoulder level or below/over shoulder/shoulder to overhead
• Seeing to distinguish colors, prepare/analyze figures, prepare/review documents, to visually inspect items and to measure/assemble at a close distance
QUALIFICATION REQUIREMENTS:
• Bachelor’s degree or formal training/certification in programming and operating CNC machines
• Minimum 5 years of experience in programming and operating CNC machines
• Experience with micrometers, calipers and other precision tools
• Intermediate computer skills (Cam software, SolidWorks, AutoCad, MS Word, Excel, PowerPoint)
• Mathematical skills including geometry and trigonometry
• Verbal and written communication skills
• Ability to prioritize and handle multiple tasks
• Ability to follow detailed and complex instructions
• Ability to problem solve/decision making
• Manual machining a plus but not required
Lift 50lbs
Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.
Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.


MILLWRIGHT 5 YEARS EXPERIENCE $21+ HR.
1ST SHIFT: 5:00AM-5:00PM
2ND SHIFT: 5:00PM-5:00AM WITH $1.00 NIGHT SHIFT DIFFERENTIAL
POSITION SUMMARY:
Installs, Fabricates, and repairs Hydraulic, Electrical, and Pneumatic Machines.

ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Maintaining Hydraulic Presses to insure they are safe and functioning correctly.
• Troubleshooting Electrical, Hydraulic issues while coming up with a corrective action or repair.
• Steel fabrication using a welder, Mill, and Lathe as needed.
• Be able to work independently or in a team environment while following instructions.
• Completes all necessary paperwork related to job.
• Follow all LOTO and safety Policies.

OTHER DUTIES AND RESPONSIBILITIES:
• Assists all Maintenance personnel when needed
• Maintains a clean and safe work area
• Operating a forklift, boom lift, and crane as needed
• Proper rigging of all machinery or parts as needed.

QUALIFICATION REQUIREMENTS:
• A minimum of 5 years’ experience as a high-level maintenance technician with a manufacturing company.
• The ability to read and interpret electrical and hydraulic schematics.
• PLC knowledge on a trouble shooting level preferred
• Must be proficient in repairing hydraulic and electrical issues.
• Good verbal and written communicational skills.
• Familiar with three phase 480-volt electrical circuits.
Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.
Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.

ADDITIONAL OPENINGS:

ASSEMBLY TECHNICIAN: Ability to read P&ID drawings and blueprints. Instrumentation fittings, cut and thread piping, read tape measure, knowledge of pipe fitting, valves and switches. operate forklift and crane $20-$22. Sand Springs

MATERIAL HANDLER/SHIPPING & RECEIVING: will use 3 different forklift sizes. Must safely unload plates, beams and other structural steel to stage for jobs and keep material fed to the saw and plasma table areas. Check materials in against paperwork to ensure that right material was received. Must be able to process the paperwork for shipping/receiving. $14-$16 1st shift West Tulsa


HEAVY HOSE SANDBLASTERS: operates specialized tools and machinery that fire high powered jets of sand or other abrasive at metal and other similar hard surfaces to remove paint, grime, old adhesives, rust and other imperfections from material to be painted or refinished. Mask off specific areas of object to protect from abrading actions. Starts equipment that directs blast or flow to surfaces of metal. Manually directs nozzle over surface of metal to ensure conformance to specs. $14-$15 East Tulsa

SKILLED CARPENTERS: must read tape measure, read blueprints, have tool belt with all carpenters tools, handle power tools , know different types of lumber and plywood. Will work with foam, corrigated plastic and braces. must be able to cut curves. Have valid drivers license to drive to different locations. 1st shift. $11.50

CARPENTERS: for overlay of garage doors, have own tools, read tape measure $15

VALVE TECHNICIANS: Candidates who have mechanical aptitude and the willingness to learn, basic manual machine exp., perform PSV testing utilizing certified test equipment, read and interpret schematics for assembly, repair and reassembly. Inspection, reporting, cleaning and reassembly of valves. $12-$14 Broken Arrow

ELECTRICAL AND MECHANICAL MAINTENANCE TECHNICIANS: Tulsa manufacture, wiring, read schematics for single and three phase motors, repair electrical switches and motors. Repair all facility machines and equipment, service and repair compressors, basic wiring. Mig/Tig welding skills. $16-$17

HEMSAW/BANDSAW OPERATORS: North Tulsa steel company $14 hr. 1st shift. FELONY FRIENDLY.

MATERIAL HANDLERS: Move big steel shapes, loads and unloads product moving throughout the plant, reads work orders and follows instructions for materials to be moved onto trucks, trays, racks, shelving by forklift, read tape measure, using hand tools to open containers using steel cutters, crowbar, clawhammer. Strapping and , bracing, or padding to prevent damage in in transit. Knowledge of steel shapes. 1st shift overtime required as needed. $16-$19 Sand Springs.

CDL A FLATBED DRIVERS: 3 years exp., must be able to drive truck pulling a 40 foot goose neck trailer, load and unload of crates and other building materials is a must. Strap down, tie down, flag on back of trailers. $14

INDUSTRIAL PAINTERS/HEAVY HOSE BLASTERS: 2 Yrs experience must be able to paint and blast, will be doing both, able to mix and shoot conventional and airless using a pot. Knowledge of all different types of paints. $14-$17

Apply in person at:
Labor Resource Pros
3117 S. Jamestown Ave.
Tulsa, OK 74135
918-742-5300
Bring drivers license and social security card to apply from 9:00am-3pm Monday-Friday
TO APPLY ONLINE, CLICK THIS LINK: https://20181214161626_mw47d1g3cqpx5xdn.applytojob.com/apply/dITWd2DxGB/Lloyd-Richards-Personnel-Application?source=Craigslist
  • Principals only. Recruiters, please don't contact this job poster.
  • do NOT contact us with unsolicited services or offers

post id: 6845820947

posted:

updated:

best of [?]